Trucks de Slalom

Joe I a écrit:At the start of May I will have a limited number of Bennetts modified by the original mad scientist, Geezer X. You can have an 8mm axle job or axle job and spherical pivot. The combination of spherical pivot on these tall trucks makes for a tight turning, TS/Hybrid cone KILLER. I don't suggest 90 or 100mm for any real GS or hill bombing. These babies are built to T_U_R_N.

Here are the specs-

*Hanger bored to 8mm and faced to 90-100-or 130mm length with raised bearing seats

*Grade 8 heat treated 8640 CrMo axles w/ 7.95mm centerless ground bearing area and 11mm of rolled 5/16-24 threads installed with high strength retaining compound and aligned.

*Spherical pivot conversion with steel ball pivot and machined Delrin pivot cup for very low friction and very little play.

*Machined Al lower bushing cup washer spacer to allow use of commercially available urethane bushings.

*MMW signature media blast finish, unassailably cool "X" imprint signifying that your trucks have been massaged by the defacto god of slalom trucks, Geezer-X.

The 8mm Axle only is $65 shipped. 8mm plus spherical pivot is $95 shipped. Stimulators are available for an additional $12, lathed or not, your choice.

If you've ever tried to get Geezer to mod trucks for you, you know it's not an easy task. So get them while you can. If you've ever gotten trucks from him, you know he stands behind his work and his work is done right.

send paypal to iaco@comcast.net with your size choice and 8mm or 8mm+spherical pivot. Order more than one, get a deal on shipping. Shipping outside 48 states=actual cost. (I'll be happy to ship a bunch to one spot if it's cheaper for you guys or deliver to one of those DH races.)

Thanks, Joe

Mig a écrit:J'ai commandé un 100mm avec ball pivot. J'ai essayé les Bennett stock de Zoon et c'était déjà complètement fou comme truck avant (mais beaucoup trop turny comme truck arrière, même déwedgé à fond) alors ceux-là vont être hallucinants!

Joe I a écrit:Here are the specs-

*Hanger bored to 8mm and faced to 90-100-or 130mm length with raised bearing seats

*Grade 8 heat treated 8640 CrMo axles w/ 7.95mm centerless ground bearing area and 11mm of rolled 5/16-24 threads installed with high strength retaining compound and aligned.

*Spherical pivot conversion with steel ball pivot and machined Delrin pivot cup for very low friction and very little play.

*Machined Al lower bushing cup washer spacer to allow use of commercially available urethane bushings.

*MMW signature media blast finish, unassailably cool "X" imprint signifying that your trucks have been massaged by the defacto god of slalom trucks, Geezer-X.

The 8mm Axle only is $65 shipped. 8mm plus spherical pivot is $95 shipped. Stimulators are available for an additional $12, lathed or not, your choice.

send paypal to iaco@comcast.net with your size choice and 8mm or 8mm+spherical pivot. Order more than one, get a deal on shipping. Shipping outside 48 states=actual cost. (I'll be happy to ship a bunch to one spot if it's cheaper for you guys or deliver to one of those DH races.)

Thanks, Joe

G a écrit:Pierre bonjour,sur la photo de ton Bennett Vector la kingpin semble être orientée à près de 90 degrés,c'est le cas?Ou c'est une illusion?Je connais rien au slalom,mais j'aime le carving,alors est ce qu'on peut monter des hangers dans les 180 mm sur ce genre de baseplate?
Un ancien maudit français.

Pierre a écrit:Nice, j'aimerais bien l'essayer avant de commander le mien.

seb a écrit:Hey Greg t'a commader du stock Radikal sans nous le dire !!

FAIT CHIER J'AVAIS besoin de axels et de riser !!

.....

Nice truck !!

color 13 a écrit:

seb a écrit:Hey Greg t'a commader du stock Radikal sans nous le dire !!

FAIT CHIER J'AVAIS besoin de axels et de riser !!

.....

Nice truck !!

Désolé , mais je pensais que depuis ta dernière commande (celle où tu as commandé sans nous le dire ! ) tu n'avais plus besoin de rien.

samynator a écrit:j'aimerai savoir quel stucks serai bon pour un sector nine goddess parce que moi jai acheter mon board avec trucks et wheels inclus

P-Hell a écrit:Moi j'aimerais ca rider tout court si ca te tente